Components
Model JXW500 Section Material Bender mainly consists of welded machine frame, forming rollers, work piece supporters, hydraulic system, roller supporting equipment, control system, etc.
Basic Parameters
 |  | | Bending section material |
Engineering practice examples |
1.Bending-resistance modulus of section: 270-2000cm3
2.Max. resistance of material: 245Mpa (as Q235A)
3.Channel steel outward bending: Model of channel steel: 50#
Min. bending diameter:ø4000mm
4.Channel steel inward bending: Model of channel steel: 40#
Min. bending diameter:ø4000mm
5.Steel tubing: Max. Section:ø426mm×16mm
Min.bending diameter:ø18000mm
Min. Section;ø200mm×10mm
Min. bending diameter:ø3500mm
6.Band steel flat bending: Max. Section: 500mm×75mm
Min. Bending diameter:ø3500mm
7.Band steel upright bending: Max. Section:200mm×60mm
Min. Bending diameter:ø5000mm
8.Working speed: 2-3M/min
9.Motor power: Oil pump: 22KW 1470rpm
Roller supporter: 0.75KW×2 0.18KW×2
10.Dimension: 4880mm×3200mm×2000mm (Length×width×height)
11.Total weight: About 32000kg
Application
Model JXW500 Section Material Bender is used to make circle, curve, or spiral for work pieces. It is widely used in such fields as petroleum industry, chemical engineering, hydroelectricity, shipbuilding, steel structure, machine making and so on. |
